| SORT | PICTURE | MODEL | FIGURE | USAGE | |
|---|---|---|---|---|---|
| ARTICULATED PIG |
 |
KOS-CSB J | carbon-steel body utilizing articulated spring, and with four (4) easily replaceable polyurethane cups and spring-loaded brushes. |
primarily used in small-diameter applications (6" to 14") with tight-radius bends. They are equipped with brushes for cleaning operations such as pre-commission and on-stream cleaning where rust, millscale, sand, wax, organic growth, mud, oxides, and other foreign matter exist. |
|
 |
KOS-SRB J | carbon-steel body utilizing articulated spring, and with four easily replaceable polyurethane cups and two split-ring brush assemblies. |
primarily used in small-diameter applications (6" to 14") with tight-radius bends. They are equipped with brushes for cleaning operations such as pre-commission and on-stream cleaning where rust, millscale, sand, wax, organic growth, mud, oxides, and other foreign matter exist. |
||
| BATCHING PIG |
 |
KOS-BGC2 | carbon-steel body equipped with three (2) easily replaceable polyurethane cups | filling and dewatering during hydrostatic testing, routine batching operations, and product removal. When equipped with a gauging plate, they are used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist. Also, they are used to prove minimum bend radius prior to intelligent pig use. | |
 |
KOS-BGC3 | carbon-steel body equipped with three (3) easily replaceable polyurethane cups | filling and dewatering during hydrostatic testing, routine batching operations, and product removal. When equipped with a gauging plate, they are used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist. Also, they are used to prove minimum bend radius prior to intelligent pig use. | ||
 |
KOS-BGC4 | carbon-steel body equipped with three (4) easily replaceable polyurethane cups | filling and dewatering during hydrostatic testing, routine batching operations, and product removal. When equipped with a gauging plate, they are used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist. Also, they are used to prove minimum bend radius prior to intelligent pig use. | ||
| BRUSH CLEANING PIG |
 |
KOS-CRB | carbon-steel body (bolting pattern configuration type) equipped with two (2) easily replaceable polyurethane cups and spring-mounted brush assemblies. | Brush cleaning pigs are used during pre-commission and on-stream cleaning where rust, mill scale, sand, wax, organic growth, mud, oxides, and other foreign matter exist. Sizes range from 2" through 48", with brush configurations including wire wheel, split-ring, wrap-around, and spring-loaded. |
|
 |
KOS-SRB | carbon-steel body (center-rod type) equipped with two (2) easily replaceable polyurethane cups and two (2) split-ring brush assemblies. | Brush cleaning pigs are used during pre-commission and on-stream cleaning where rust, mill scale, sand, wax, organic growth, mud, oxides, and other foreign matter exist. Sizes range from 2" through 48", with brush configurations including wire wheel, split-ring, wrap-around, and spring-loaded. | ||
| CONICALCUP PIG |
 |
KOS-VP3BA | carbon-steel body equipped with three (3) easily replaceable polyurethane conical cups. | to perform all the duties of batching, gauging, ydrostatic testing, product removal, pre-ommissioning and on-stream cleaning. | |
 |
KOS-PSCC2 | carbon-steel body equipped with two (2) easily replaceable polyurethane conical cups and spring-mounted brushes. | to perform all the duties of batching, auging,hydrostatic testing, product removal, pre-commissioning and on-stream cleaning. | ||
| DISPLACEMENT PIG |
 |
KOS-BGD2 | carbon-steel body equipped with two (2) easily replaceable polyurethane discs. |
used for standard pigging operations such as filling and dewatering during hydrostatic testing, routine batching operations, product removal, or any pigging operation requiring bidirectional use. These pigs are also very effective for product separation. They can easily be equipped with a gauging plate and used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist, as well as, prove minimum bend radius prior to intelligent pig use. |
|
 |
KOS-BGD4 | carbon-steel body equipped with two (4) easily replaceable polyurethane discs. |
used for standard pigging operations such as filling and dewatering during hydrostatic testing, routine batching operations, product removal, or any pigging operation requiring bidirectional use. These pigs are also very effective for product separation. They can easily be equipped with a gauging plate and used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist, as well as, prove minimum bend radius prior to intelligent pig use. |
||
| MULTI DISK PIG |
 |
KOS-MD | carbon-steel body equipped with two (2) guide, four (4) sealing, and six (6) spacer polyurethane discs, all of which are easily replaceable. |
The multi-disc series of pigs allow for excellent sealing capabilities for performing the duties of batching, gauging, product removal, pre-commission and on-stream cleaning, or any pigging operation requiring bidirectional use. When equipped with a gauging plate, the pig is used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist. Also used to prove minimum bend radius prior to intelligent pig use. |
|
 |
KOS-MDB | MDB Multi-Disc Brush Pigs consist of the same body design as MD along with easily replaceable brushes. | The multi-disc series of pigs allow for excellent sealing capabilities for performing the duties of batching, gauging, product removal, pre-commission and on-stream cleaning, or any pigging operation requiring bidirectional use. When equipped with a gauging plate, the pig is used to prove pipe roundness and to ensure excessive weld penetration or debris does not exist. Also used to prove minimum bend radius prior to intelligent pig use. | ||
Home